WD Western Digital WDC WD80EZZX-11CSGA0, 8TB, SATAIII, 3,5"
Die Festplatte funktionierte bis zum Ausbau einwandfrei und wird gut verpackt geliefert. Das hier ist ein Nichtraucher und Tier freier Haushalt.
Festplatte wird verkauft, weil ich auf größere Festplatten umgestiegen bin. Dank der Drehzahl von 5400U/min ist die Festplatte super leise, selbst wenn man 20 Stück in einem Rack hat.
Die Festplatte war in einem Backup Server verbaut, der die meiste Zeit abgeschaltet war, daher hat die Festplatte eine relativ geringe Laufleistung, siehe S.M.A.R.T Wert Power_On_Hours.
Technische Details:
(Angaben ohne Gewähr, wie vom Hersteller angegeben)
Formfaktor: 3.5"
Drehzahl: 5400U/min
Cache: 128MB
Festplattenanalyse und S.M.A.R.T.:
Die Festplatte wurde mit dem Linux-Tool "badblocks" getestet, indem die ganze Festplatte jeweils mit dem Muster 0xaa (0b10101010) und 0x55 (0b01010101) beschrieben und wieder gelesen wurde. Also zweimal komplett vollschreiben und zweimal komplett lesen! Dies gibt denke ich eine vernünftige Aussage darüber, ob mit der Festplatte alles in Ordnung ist oder nicht. Test dauert ca. 61 Stunden. Linux Terminal Ausgabe:lexaiden@lexserv01 ~> sudo badblocks -vsw -t 0xAA -t 0x55 -b 4096 -c 2048 /dev/sdi [sudo] password for lexaiden: Checking for bad blocks in read-write mode From block 0 to 1953506645 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Pass completed, 0 bad blocks found. (0/0/0 errors)
Nach dem Schreib-/Lesetest mit badblocks habe ich die S.M.A.R.T.-Werte ausgelesen. Linux Terminal Ausgabe:
lexaiden@lexserv01 ~> sudo smartctl -AiH --log=error /dev/sdi [sudo] password for lexaiden: smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.68-1-MANJARO] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (CMR) Device Model: WDC WD80EZZX-11CSGA0 Serial Number: VLKTWNHY LU WWN Device Id: 5 000cca 260f59741 Firmware Version: 83.H0A03 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.5/5706 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Feb 21 13:38:34 2026 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 131 131 054 Pre-fail Offline - 116 3 Spin_Up_Time 0x0007 159 159 024 Pre-fail Always - 371 (Average 457) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 48 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1834 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 46 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 385 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 385 194 Temperature_Celsius 0x0002 250 250 000 Old_age Always - 24 (Min/Max 21/50) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 194 SMART Error Log Version: 1 ATA Error Count: 194 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 194 occurred at disk power-on lifetime: 1751 hours (72 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 00 00 29 81 40 00 00:07:19.986 READ FPDMA QUEUED 60 98 10 68 28 81 40 00 00:07:19.985 READ FPDMA QUEUED 60 50 08 10 28 81 40 00 00:07:19.985 READ FPDMA QUEUED 60 08 00 00 28 81 40 00 00:07:19.985 READ FPDMA QUEUED 60 08 00 c8 27 81 40 00 00:07:19.985 READ FPDMA QUEUED Error 193 occurred at disk power-on lifetime: 1751 hours (72 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 a8 00 28 27 81 40 00 00:07:19.977 READ FPDMA QUEUED 60 20 00 00 27 81 40 00 00:07:19.976 READ FPDMA QUEUED 60 08 00 c8 26 81 40 00 00:07:19.976 READ FPDMA QUEUED 60 08 00 c0 26 81 40 00 00:07:19.976 READ FPDMA QUEUED 60 08 00 b8 26 81 40 00 00:07:19.976 READ FPDMA QUEUED Error 192 occurred at disk power-on lifetime: 1751 hours (72 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 00 80 26 81 40 00 00:07:19.842 READ FPDMA QUEUED 60 08 00 78 26 81 40 00 00:07:19.842 READ FPDMA QUEUED 60 08 00 70 26 81 40 00 00:07:19.842 READ FPDMA QUEUED 60 08 00 68 26 81 40 00 00:07:19.842 READ FPDMA QUEUED 60 08 00 60 26 81 40 00 00:07:19.842 READ FPDMA QUEUED Error 191 occurred at disk power-on lifetime: 1751 hours (72 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 d0 00 00 26 81 40 00 00:07:19.834 READ FPDMA QUEUED 60 10 10 e8 26 81 40 00 00:07:19.804 READ FPDMA QUEUED 60 08 08 d8 26 81 40 00 00:07:19.804 READ FPDMA QUEUED 60 08 00 f8 03 00 40 00 00:07:19.803 READ FPDMA QUEUED 60 08 00 f0 03 00 40 00 00:07:19.803 READ FPDMA QUEUED Error 190 occurred at disk power-on lifetime: 1751 hours (72 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 00 b8 03 00 40 00 00:07:19.787 READ FPDMA QUEUED 60 08 00 b0 03 00 40 00 00:07:19.787 READ FPDMA QUEUED 60 08 00 a8 03 00 40 00 00:07:19.787 READ FPDMA QUEUED 60 08 00 a0 03 00 40 00 00:07:19.787 READ FPDMA QUEUED 60 08 00 98 03 00 40 00 00:07:19.787 READ FPDMA QUEUED
Lieferumfang:
- 1x Western Digital WDC WD80EZZX-11CSGA0
Fotos:
Rechtlicher Hinweis:
Dies ist ein privates Angebot. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadenersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung von Pflichten des Verkäufers sowie für jede Verletzung von Leben, Körper und Gesundheit. Hier gibt es kein Widerrufsrecht - keine Garantie - keine weitere Verpflichtung zur Rücknahme (falls nicht auf Kulanzbasis in Absprache freiwillig gewährt!).