WD Western Digital WDC WD80EZAZ-11TDBA0, 8TB, SATAIII, 3,5"
Die Festplatte funktionierte bis zum Ausbau einwandfrei und wird gut verpackt geliefert. Das hier ist ein Nichtraucher und Tier freier Haushalt.
Festplatte wird verkauft, weil ich auf größere Festplatten umgestiegen bin. Dank der Drehzahl von 5400U/min ist die Festplatte super leise.
Technische Details:
(Angaben ohne Gewähr, wie vom Hersteller angegeben)
Formfaktor: 3.5"
Drehzahl: 5400U/min
Cache: 256MB
Festplattenanalyse und S.M.A.R.T.:
Die Festplatte wurde mit dem Linux-Tool "badblocks" getestet, indem die ganze Festplatte jeweils mit dem Muster 0xaa (0b10101010) und 0x55 (0b01010101) beschrieben und wieder gelesen wurde. Also zweimal komplett vollschreiben und zweimal komplett lesen! Dies gibt denke ich eine vernünftige Aussage darüber, ob mit der Festplatte alles in Ordnung ist oder nicht. Test dauert ca. 61 Stunden. Linux Terminal Ausgabe:lexaiden@lexserv01 ~> sudo badblocks -vsw -t 0xAA -t 0x55 -b 4096 -c 2048 /dev/sdi [sudo] password for lexaiden: Checking for bad blocks in read-write mode From block 0 to 1953506645 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Pass completed, 0 bad blocks found. (0/0/0 errors)
Nach dem Schreib-/Lesetest mit badblocks habe ich die S.M.A.R.T.-Werte ausgelesen. Linux Terminal Ausgabe:
lexaiden@lexserv01 ~> sudo smartctl -AiH --log=error /dev/sdi [sudo] password for lexaiden: smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.73-1-MANJARO] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke === START OF INFORMATION SECTION === Model Family: Western Digital Ultrastar (He10/12) Device Model: WDC WD80EZAZ-11TDBA0 Serial Number: 7SGHBY4D LU WWN Device Id: 5 000cca 252c6fe63 Firmware Version: 83.H0A83 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.5/5706 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 4 10:40:18 2026 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0004 126 126 054 Old_age Offline - 124 3 Spin_Up_Time 0x0007 151 151 024 Pre-fail Always - 435 (Average 433) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 22 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 229 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 21 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 58 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 58 194 Temperature_Celsius 0x0002 196 196 000 Old_age Always - 33 (Min/Max 20/37) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 8 SMART Error Log Version: 1 ATA Error Count: 8 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 occurred at disk power-on lifetime: 138 hours (5 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 b0 00 dc 99 40 08 00:01:28.498 READ FPDMA QUEUED 60 00 a8 00 d0 99 40 08 00:01:28.414 READ FPDMA QUEUED 60 00 a0 00 d4 99 40 08 00:01:28.414 READ FPDMA QUEUED 60 00 98 00 cc 99 40 08 00:01:28.410 READ FPDMA QUEUED 60 00 90 00 c0 99 40 08 00:01:28.403 READ FPDMA QUEUED Error 7 occurred at disk power-on lifetime: 138 hours (5 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 d0 00 50 99 40 08 00:01:27.746 READ FPDMA QUEUED 60 00 d8 00 5c 99 40 08 00:01:27.688 READ FPDMA QUEUED 60 00 c8 00 54 99 40 08 00:01:27.685 READ FPDMA QUEUED 60 00 c0 00 4c 99 40 08 00:01:27.672 READ FPDMA QUEUED 60 00 b8 00 40 99 40 08 00:01:27.665 READ FPDMA QUEUED Error 6 occurred at disk power-on lifetime: 138 hours (5 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 88 00 20 99 40 08 00:01:27.078 READ FPDMA QUEUED 60 00 90 00 2c 99 40 08 00:01:27.023 READ FPDMA QUEUED 60 00 80 00 24 99 40 08 00:01:27.017 READ FPDMA QUEUED 60 00 78 00 1c 99 40 08 00:01:27.006 READ FPDMA QUEUED 60 00 70 00 10 99 40 08 00:01:27.004 READ FPDMA QUEUED Error 5 occurred at disk power-on lifetime: 138 hours (5 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 58 00 b0 8e 40 08 00:01:25.435 READ FPDMA QUEUED 60 00 50 00 a4 8e 40 08 00:01:25.384 READ FPDMA QUEUED 60 00 48 00 ac 8e 40 08 00:01:25.384 READ FPDMA QUEUED 60 00 40 00 a0 8e 40 08 00:01:25.364 READ FPDMA QUEUED 60 00 38 00 94 8e 40 08 00:01:25.361 READ FPDMA QUEUED Error 4 occurred at disk power-on lifetime: 105 hours (4 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 78 00 5c 8d 40 08 00:03:59.148 READ FPDMA QUEUED 60 00 08 00 0c 7a 40 08 00:03:59.077 READ FPDMA QUEUED 60 80 00 80 06 7a 40 08 00:03:59.076 READ FPDMA QUEUED 60 00 f8 00 00 7a 40 08 00:03:59.066 READ FPDMA QUEUED 60 80 b8 00 04 7a 40 08 00:03:59.066 READ FPDMA QUEUED
Lieferumfang:
- 1x Western Digital WDC WD80EZAZ-11TDBA0
Fotos:
Rechtlicher Hinweis:
Dies ist ein privates Angebot. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadenersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung von Pflichten des Verkäufers sowie für jede Verletzung von Leben, Körper und Gesundheit. Hier gibt es kein Widerrufsrecht - keine Garantie - keine weitere Verpflichtung zur Rücknahme (falls nicht auf Kulanzbasis in Absprache freiwillig gewährt!).