WD Western Digital WDC WD80EMAZ-00WJTA0, 8TB, SATAIII, 3,5"
Die Festplatte funktionierte bis zum Ausbau einwandfrei und wird gut verpackt geliefert. Das hier ist ein Nichtraucher und Tier freier Haushalt.
Festplatte wird verkauft, weil ich auf größere Festplatten umgestiegen bin. Dank der Drehzahl von 5400U/min ist die Festplatte super leise.
Technische Details:
(Angaben ohne Gewähr, wie vom Hersteller angegeben)
Formfaktor: 3.5"
Drehzahl: 5400U/min
Cache: 256MB
Festplattenanalyse und S.M.A.R.T.:
Die Festplatte wurde mit dem Linux-Tool "badblocks" getestet, indem die ganze Festplatte jeweils mit dem Muster 0xaa (0b10101010) und 0x55 (0b01010101) beschrieben und wieder gelesen wurde. Also zweimal komplett vollschreiben und zweimal komplett lesen! Dies gibt denke ich eine vernünftige Aussage darüber, ob mit der Festplatte alles in Ordnung ist oder nicht. Test dauert ca. 61 Stunden. Linux Terminal Ausgabe:lexaiden@lexserv01 ~> sudo badblocks -vsw -t 0xAA -t 0x55 -b 4096 -c 2048 /dev/sdc [sudo] password for lexaiden: Checking for bad blocks in read-write mode From block 0 to 1953506645 Testing with pattern 0xaa: done Reading and comparing: done Testing with pattern 0x55: done Reading and comparing: done Pass completed, 0 bad blocks found. (0/0/0 errors)
Nach dem Schreib-/Lesetest mit badblocks habe ich die S.M.A.R.T.-Werte ausgelesen. Linux Terminal Ausgabe:
lexaiden@lexserv01 ~> sudo smartctl -AiH --log=error /dev/sdc [sudo] password for lexaiden: smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.68-1-MANJARO] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke === START OF INFORMATION SECTION === Model Family: Western Digital Ultrastar (He10/12) Device Model: WDC WD80EMAZ-00WJTA0 Serial Number: 7SKXD1RW LU WWN Device Id: 5 000cca 252f72e28 Firmware Version: 83.H0A83 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.5/5706 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Feb 28 11:20:30 2026 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0004 129 129 054 Old_age Offline - 112 3 Spin_Up_Time 0x0007 160 160 024 Pre-fail Always - 412 (Average 411) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 31 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 544 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1746 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1746 194 Temperature_Celsius 0x0002 203 203 000 Old_age Always - 32 (Min/Max 21/34) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 143 SMART Error Log Version: 1 ATA Error Count: 143 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 143 occurred at disk power-on lifetime: 445 hours (18 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 30 70 18 0d 00 40 08 4d+00:21:46.579 READ FPDMA QUEUED 60 08 f0 00 0d c0 40 08 4d+00:21:46.489 READ FPDMA QUEUED 60 08 30 00 b9 6a 40 08 4d+00:21:46.483 READ FPDMA QUEUED 60 08 e8 00 b9 ea 40 08 4d+00:21:46.480 READ FPDMA QUEUED 60 08 18 00 0d c0 40 08 4d+00:21:46.477 READ FPDMA QUEUED Error 142 occurred at disk power-on lifetime: 348 hours (14 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 50 00 44 83 40 08 00:03:05.702 READ FPDMA QUEUED 60 00 48 00 38 83 40 08 00:03:05.622 READ FPDMA QUEUED 60 00 40 00 3c 83 40 08 00:03:05.620 READ FPDMA QUEUED 60 00 38 00 34 83 40 08 00:03:05.613 READ FPDMA QUEUED 60 00 30 00 28 83 40 08 00:03:05.608 READ FPDMA QUEUED Error 141 occurred at disk power-on lifetime: 348 hours (14 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 40 00 7c 54 40 08 00:02:53.048 READ FPDMA QUEUED 60 00 48 00 78 54 40 08 00:02:52.968 READ FPDMA QUEUED 60 00 38 00 74 54 40 08 00:02:52.963 READ FPDMA QUEUED 60 00 30 00 68 54 40 08 00:02:52.940 READ FPDMA QUEUED 60 00 28 00 6c 54 40 08 00:02:52.940 READ FPDMA QUEUED Error 140 occurred at disk power-on lifetime: 348 hours (14 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 50 00 ac 2a 40 08 00:02:33.958 READ FPDMA QUEUED 60 00 48 00 b4 2a 40 08 00:02:33.897 READ FPDMA QUEUED 60 00 40 00 a8 2a 40 08 00:02:33.888 READ FPDMA QUEUED 60 00 38 00 9c 2a 40 08 00:02:33.882 READ FPDMA QUEUED 60 00 30 00 a4 2a 40 08 00:02:33.882 READ FPDMA QUEUED Error 139 occurred at disk power-on lifetime: 348 hours (14 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 18 00 b8 28 40 08 00:02:32.781 READ FPDMA QUEUED 60 00 10 00 ac 28 40 08 00:02:32.710 READ FPDMA QUEUED 60 00 08 00 b4 28 40 08 00:02:32.709 READ FPDMA QUEUED 60 00 00 00 a8 28 40 08 00:02:32.688 READ FPDMA QUEUED 60 00 f0 00 9c 28 40 08 00:02:32.683 READ FPDMA QUEUED
Lieferumfang:
- 1x Western Digital WDC WD80EMAZ-00WJTA0
Fotos:
Rechtlicher Hinweis:
Dies ist ein privates Angebot. Die Ware wird unter Ausschluss jeglicher Gewährleistung verkauft. Der Ausschluss gilt nicht für Schadenersatzansprüche aus grob fahrlässiger bzw. vorsätzlicher Verletzung von Pflichten des Verkäufers sowie für jede Verletzung von Leben, Körper und Gesundheit. Hier gibt es kein Widerrufsrecht - keine Garantie - keine weitere Verpflichtung zur Rücknahme (falls nicht auf Kulanzbasis in Absprache freiwillig gewährt!).